close[X]
Your shopping Cart
Part No. Quantity Price Subtotal ETD
Total:$0
Freight and Insurance cost: $ 0.00
View Shopping Cart Checkout
Home / Optical Device / Fiber Amplifier / Compact Laser Diode Driver For Laser Diodes with TEC and Current Driver

Compact Laser Diode Driver For Laser Diodes with TEC and Current Driver

PD-LD’s compact Laser Diode Driver is a compact all-in-one unit designed for convenience of use, and combines a user interchangeable mount for a laser diode, SLED, SOA or similar device, a current driver and a TEC controller, all in a self-contained enclosure.This product includes a USB port and a software control application with a graphical user interface (GUI) for real-time device monitoring, control and data logging.

This Driver is used with either a 14-pin butterfly mount (provided with Type I, Type II and custom pin out routing boards) and/or a DIL mount. The mounts are user-interchangeable and are sold separately from the base unit.

Name Price Operation
Features

● Compact all-in-one laser diode controller

● CW operation and external modulation up to 500kHz

● Operating current range 15 to 2000mA

● USB port and control software included

● Graphical User Interface for real-time monitoring, control and data logging

● 14-pin butterfly mount or 14-pin DIL mount included

● Additional mounts are optional

● Compact size (164x105x95mm)

● 110-240V AC adapter included 

Physical/Optical Characteristics

Items

Parameters

Compatible   Laser type

14pin Butterfly package/DILPacakge

Power   supply

8~12VDC

Driving Current

Max 2A

Laser diode Driving Current

Max Driving Current

0~500mA/0-2000mA(Optional)

Max Output Voltage

5V

Internal STW scanning period

10~200ms (Set by Software GUI )

Internal STW scanning Current period

0~200mA (Set by Software GUI )

External modulated     signal’s Frequency Range-3dB

DC~100kHz

External modulation coefficient

200 mA/V ± 2%

External modulated signal’s Input Voltage Range *

0~850mV DC

External modulated signal’s Input interface

BNC, Female

External modulated signal’s Input impedance

20kΩ

Temperature Control

Temperature Control Range

15~50

Temperature Display Resolution

0.1

Short-term stability1hr airtight cavity

0.001

Long-term stability1day airtight   cavity

0.002

Temperature sensor

Resistance type NTC10 kΩ±1%@ 25

TEC Peak Current

±1A

TEC Peak Voltage

5V

Temperature Control Interface

DB9Male

Others

Computer Interface

USB type B

Operation Temperature

0~50

Store Temperature

-10~80

DimensionLxWxH

15cm*11cm*10cm

Weight

700g

Note:* The modulation signal peak level is determined by the max driving current of the laser diode,It may Permanent damaged the LASER DIODE When Customer over Modulated.Before Appling the Modulated Voltage into this Drvider.Please make sure the peak Voltage level of the driver suites for the LD’s Safe driving Current. 


The following we give out two Operation Conditions

1. The laser modulation signal is only the external modulation input signal, External modulated signal’s Input Voltage is limited by the max Driving Current( ILim),The max peak voltage level Vmax should less than 5×ILim(A),and the lowest voltage should>0V, one negative voltage is prohibited.

eg:One DFB LASER DIODE’s max driving Current is 0.15A, External modulated signal’s peak Voltage level should be: Vmax≤5×0.15=0.75V,The lowest modulated peak voltage should be:Vmin≥0V;


2.When the laser modulated signal is selected as the synthesis with external signal and internal sawtooth.When the maximum current of the internal sawtooth wave is set at Imax, the minimum current is set at Imin, the maximum Volatge level Vmax of the external modulation signal should be less than 5 x (ILim-Imax) (A), and the minimum level Vmin of the external modulated signal should be greater than - (Imin /5).

Example: the maximum safe drive current of the laser, 0.15A,

The maximum current of the internal sawtooth wave is Imax=0.075A,

The minimum current Imin=0.015A,

The external modulation signal peak level Vmax is less than 5 x (0.15-0.075) =0.375V.

The minimum level Vmin is (0.015)÷(5) =-0.003V;


Software GUI

jm_副本.png

Dimensions and Pin definitions


dr2_副本.jpg

Two definitions for optional


Type A

H4.jpg

1

Thermistor

8

Case Ground

2

Thermistor

9

 Case Ground

3

Laser dc Bias   (Cathode) (–)

10

Case Ground

4

PD Monitor Anode   (-)

11

Laser Anode (+)

5

PD Monitor Cathode   (+)

12

RF Laser Input   Cathode (–)

6

Thermoelectric   Cooler (+)

13

Laser Anode (+)

7

Thermoelectric   Cooler (–)

14

Case Ground


Type B(Pump Type)

dr4_副本.png

1

Thermoelectric Cooler (+)

8

N/C

2

Thermistor

9

N/C

3

PD Monitor Anode (-)

10

Laser Anode (+)

4

PD Monitor Cathode (+)

11

Laser Cathode (–)

5

Thermistor 

12

N/C

6

N/C

13

Case Ground

7

N/C

14

Thermoelectric Cooler (–)


Absolute Maximum Ratings

Item

Symbol

Unit

Min

Typ

Max

Testing Condition

Axial Pull Force


N

-

-

5N

3x10s

Side Pull Force


N

-

-

2.5N

3x10s

Fiber Bend Radius



16mm



-

Store Temperature

TSTG

-40

-

+85

2000hr

Operating Temperature

TOP

-55

-

+125


Relative Humidity

RH


5%

-

95%

Noncondensing

Application

● TDLAS
● Laser diode Control

OEM Info

PL-LDM☆-□

☆:

500:Max Driving Current at 500mA

2000:Max Driving Current at 2000mA

□:

A-Type A pin definition

B-Type B pin definition

Related products