● High Power Stability

● Low Insertion Loss

● High Return Loss

● High Extinction Ratio

Tsub=25°C, CW bias unless stated otherwise

FUD3460 Fiber Nominal Characteristics and Tolerances

● PM amplifiers 

● Fiber lasers 

● Test instrumentation 

PL- PMP -☆- W□□□□-□□-□-XX(PMP: Polarization Maintaining Patchcord)

☆: Fiber length

1: 1m
0.5: 0.5m

10: 10m

C: Customize

W□□□□: Wavelength

850: 850nm

1030: 1030nm

1064: 1064nm

*****
1550: 1550nm

□□: Fiber Jacket

2LT: 2mm Loose Tube

L: 900um Loose tube

C: Customize

□: Working axis

F: Fast axis aligment

S: Slow axis aligment

XX: Fiber and Connector Type

FUDA= FUD-3460 10/125 fiber + FC/APC
FUDP= FUD-3460 10/125 fiber + FC/PC

FUDN= FUD-3460 10/125 fiber+None

PP= PM 20/125 fiber + FC/PC

PA= PM 20/125 fiber + FC/APC

Labeling

Laser Components Safety

Due to the small size of the Fiber optic module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below:

User Safety

Safety and Operating Considerations

The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.

CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.

Operating the laser Components outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.