1×2/2×2 2000nm Single Mode Broadband Splitter-Ideal-Photonics Inc

1×2/2×2 2000nm Single Mode Broadband Splitter

Idealphotonics offers a wide range of narrowband and wideband single mode 2x2 Single Mode Fiber Optic Couplers, also known as taps, as highlighted in the table to the right. Couplers that can be used at 2000±50 nm are featured below.

These couplers are available with a coupling ratio of 50:50, 75:25, 90:10, or 99:1. They are bidirectional, allowing any port to be used as an input (refer to the 2x2 Coupling Examples tab above). An individual test data sheet is provided with each coupler; wideband coupler data sheets include coupling data and performance graphs that extend outside the specified bandwidth, covering the wavelength range where the coupling ratio remains within the specified tolerance.

	Picture	Name	Part NO./Stock NO.	Description	Operation Wavelength	Bandwidth	Lead Time	Price	Operation
		2×2 2000nm Single Mode Broadband Splitter	PMFC-2000-2-10-F-2-L31	Operating wavelength 2000nm；Bandwidth ±50nm; 2×2；Operating power(max) (CW) ≤500mW	2000nm	±50nm	3-4 weeks	$515.00
		1×2 2000nm Single Mode Broadband Splitter	PMFC-2000-1-10-F-2-L31	Operating wavelength 2000nm；Bandwidth ±50nm; 1×2；Operating power(max) (CW) ≤500mW	2000nm	±50nm	2-3 weeks	$515.00

Features

● Low Insertion Loss

● High Return Loss

● Fiber Sensors

Specifications

Parameters	Unit	Values
Port Type		1X2	2X2
Center Wavelength	nm	2000
Operating Wavelength Range	nm	±50
Max.Excess Loss	dB	1.21.5
Max.Uniformity (onlyfor50/50)	dB	0.81.0
Tap Ratio (Port2/4)		1±0.3%,2±0.6%,5±1.2%,10%,and50%
Min.Return Loss	dB	50
Min.Extinction Ratio (onlyforFtype)	dB	2018
Min.Extinction Ratio (onlyforBtype)	dB	1816
Max.Optical Power(CW)	mW	500(onlyforSplitter)
Max.Tensile Load	N	5
Fiber Type		PM1550 or PM1950 Fiber on Port1&Port3
Operating Temperature	℃	-5 to +70
Storage Temperature	℃	-40 to +85

* Above specifications are for devices without the connectors.

* For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, and ER will be 2dB lower.

*The PM fiber and the connector key are aligned to the slow axis. And for F type, fast axis is blocked.

Dimension Drawing

Application

● Fiber Optic Instruments

● Fiber Amplifiers

● Fiber Lasers

● Fiber Sensors

Ordering Info

PMFC-①①-②-③③-④-⑤⑤⑤⑤ -⑥⑥⑥⑥ -⑦-⑧

①①: Wavelength

④: Axis Alignment

⑦: Fiber Type on Tap port

1 - SMF-28e Fiber

F - Fast Axis Blocked

20 - 2000nm

2 - SM 1950 Fiber

B - Both Axis Working

SS - Specify

3 - PM 1550 Fiber

②: Port

⑤⑤⑤

4 - PM 1950 Fiber

: Connector Type on Port 1, 2, 3 & 4

S - Specify

1 - FC/UPC

1 - 1x2

2 - FC/APC

2 - 2x2

3 - SC/UPC

⑧: Fiber Length

③③

0.8 - 0.8m

4 - SC/APC

: Coupling Ratio

S - Specify

N - None

01 - 1/99

S - Specify

02 - 2/98

05 - 5/95

10 - 10/90

⑥⑥⑥: Fiber Jacket on Port 1, 2, 3 & 4

B - 250um Fiber

50 - 50/50

L - 900um Loose Tube

SS - Specify

S - Specify

1×2/2×2 2000nm Single Mode Broadband Splitter

1x2 fast Fiber Optical Switch (PM)

Mini Fused 980/1550nm WDM for fiber optic gyro Light source

Single Mode Fiber Optic Circulators

1310/1480/1550nm Faraday Rotator Mirror

Polarization Maintaining 1550 nm Fiber Coupled Acousto-Optic Modulator

1064nm Faraday Rotator Mirror (FRM)