Specifications
Specs | Unit | Typ | Remark |
PN# | - | EDFA-PA-35 | EDFA-PA-45 |
|
wavelength range | nm | 1530~1565nm | C-band |
input power | dBm | -35~-25 | -45~-25 |
|
Gain | dB | 35@-35dBm Input | 45@-45dBm Input | 35@-25dBm Input |
Noise Figure | dB | ≤4.5 |
|
Polarization dependent gain | dB | ≤0.3 |
|
Polarization Mode Dispersion | ps | ≤0.5 |
|
Input/output Port Isolation | dB | >35 |
|
Optical power monitoring | - | Output optical power monitoring |
|
Pigtail Type | - | SMF-28 |
|
Connector | - | FC/APC |
|
Work mode | - | Automatic current control(ACC) |
|
For weak signals with a power of -35dBm, it can provide an effective gain of not less than 35dB,
and the amplified signal-to-background ratio is higher than 30dB
Operation Range 1530~1565nm（Not same time test）
Electrical Requirements
Electrical and Environmental Parameters | Bench top | Module |
Control Mode | Button | RS232 serial communication |
Communication Interface | Optional | DB9 Female |
Power Supply | 100~240V AC,<30W | 5V DC,<15W |
Dimension | 260(W) X 280(D)X120(H)mm | 125(W)X150(D)X20(H)mm
|
Operation Temp Range | -5～+35℃ |
Operation Humidity Range | 0～70% |
Ordering Info
Ordering info |
EDFA | Wavelength | EDFA Type | Gain(dB) | Fiber Type | Package Type |
| C=C Band | SG=Small Signal | 35=35dB@-35dBm 45=45dB@-45dBm | SM=Single mode fiber | M=Module B=Bench top |
*Note 1：This EDFA product can be used to amplify any single or multiple wavelength signals within the working wavelength range, but the gain spectrum flatness is not considered when multi-wavelength signals are input. As shown on this page, the EDFA-C-PA-35 small signal amplifier can achieve high gain amplification for input signals of different wavelengths in the C-band (multiple wavelengths are not simultaneously input to the EDFA in the figure), and the input power of a single wavelength is -35dBm , the effective gain is greater than 35dB, and the amplified signal-to-background noise ratio is greater than 30dB.
