The LD-PD'S PM-DCFL Series 1064nm ps Dual Channel fiber lasers. It is an excellent solution for Industrial Ultra-Fast Laser Processing Applications Solution. The picosecond laser has the typical advantages of traditional fiber laser, namely, small size (shape size: 200 *100 *40mm), no need of thermal management, and high output beam quality (single mode output).
This ultrafast laser has spectral center wavelength at 1064 nm, the repetition frequency is 20-40 MHz, typical pulse width is less than 10ps, and the maximum Peak power of each channel is 300W. Due to the use of special non-linear technology to achieve the equivalent saturable absorber effect, the output pulse not only has high long-term stability, but also can withstand high and low temperature working environment from 0-45 degrees. The laser also has excellent mode-locking self-startup performance. It has achieved 100,000 times of mode-locking self-startup, and most of the startup time is less than 2 seconds.
Picture
Name
Part NO./Stock NO.
Description
Central wavelength
Output power
Peak Power
Pulse width
Lead Time
Price
Operation
Features
● Excellent long-term stability
● Operation Temperature：+5～+40℃
● Ultra compact Size, Low power consumption
● Dual Channel Synchronized Output
E/O Characteristics
Tsub=25°C, CW bias unless stated otherwise
Parameter
Unit
Value
Center Wavelength (λc)
nm
1064
Pulse width
ps
＜10
Peak Power
w
300
Pulse Energy
nJ
0.3-3
Repetition Frequency
MHZ
20-40
Beam quality M2
TEM00
＜1.1
Polarization
dB
＞20
Power Stability
%
＜1%rms
Dual Ports Output
FC/APC
Fiber Type
PM980
Operating Temperature
℃
10 to +50
Storage Temperature
℃
0 to +60
Start Time
s
＜5
Power Supply
V/A
5VDC/1A
Power Consumption
W
5
Dimension
mm
200X100X40
Weight
Kg
1
Testing data and Spectrum
15 Hours Long term Power stability testing
Package Size
PM980 Fiber Nominal Characteristics and Tolerances
Parameters
Specification
Operating Wavelength
950 – 1100 nm
Cross Talk
-40dB
Mode Field Diameter(Gaussian)
6.6 ± 0.5 µm @ 1550 nm
Cutoff
900 ± 40 nm
Beat Length
1.5-2.7 mm
Application
● Terahertz Generation
● Optical frequency combs
● Bio-imaging
● Biomedicine
● Optical sensing
● Optical communication
● Pump source for mid-IR laser
Ordering Info
PL-PM-DCFL-SW△-W□□□□-□□-□-XX
SW△: Spectral Width
120F: ＜120fs
10P: ＜10ps
W□□□□: Wavelength
1030:1030nm
1064:1064nm
*****
1550：1550nm
□□：Average Power
30：30mw
100：100mw
C:Customize
□:Working axis
F:Fast axis alignment
S:Slow axis alignment
XX: Fiber and Connector Type
PPN= PM 980 fiber+ None
PP= PM 980 fiber + FC/PC
PA= PM 980 fiber + FC/APC
Labeling
Laser Components Safety
Due to the small size of the Fiber optic module, the box packaging is labeled with the laser radiation hazard symbol and safety warning labels shown below:
User Safety
Safety and Operating Considerations
The laser light emitted from this laser diode is invisible and may be harmful to the human eye. Avoid looking directly into the fiber when the device is in operation.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT INCREASES EYE HAZARD.
Operating the laser Components outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with this component cannot exceed maximum peak optical power.
