close[X]
Your shopping Cart
Part No. Quantity Price Subtotal ETD
Total:$0
Freight and Insurance cost: $ 0.00
View Shopping Cart Checkout
Home / Applications / DVS / Small Signal Erbium-doped Fiber Pre-Amplifier for C-band

Small Signal Erbium-doped Fiber Pre-Amplifier for C-band

wavelength range 1530~1565nm; input power -35~-25dBm;Gain 35@-35dBm; Pigtail Type SMF-28; Connector FC/APC

Part Number  :  EDFA-PA-35
Unit Price  :  $3500.00
Lead time   :  2-3 weeks
Inventory quantity   :  0
Stock NO.   :  
Quantity   :  
Overview

C band (*Note 1) erbium-doped fiber small-signal amplifier (PA amplifier for short) is an amplifier dedicated to weak optical signals in the C-band in the range of -45dBm ~ -25dBm. The typical small signal gain is as high as 35~45 dB. It has a low noise figure and is usually used before photodetectors to improve the detection ability of weak light signals.

Specifications

Specs

Unit

Typ

Remark

PN#

-

EDFA-PA-35

EDFA-PA-45


wavelength range

nm

1530~1565nm

C-band

input power

dBm

-35~-25

-45~-25


Gain

dB

35@-35dBm Input

45@-45dBm Input

35@-25dBm Input

Noise Figure

dB

4.5


 Polarization dependent gain

dB

0.3


Polarization Mode Dispersion

ps

0.5


Input/output Port Isolation

dB

>35


Optical power monitoring

-

Output optical power monitoring


Pigtail Type

-

SMF-28


Connector

-

FC/APC


Work mode

-

Automatic current control(ACC)



t2.png


For weak signals with a power of -35dBm, it can provide an effective gain of not less than 35dB, 

and the amplified signal-to-background ratio is higher than 30dB


t3.png

Operation Range 1530~1565nm(Not same time test)

Electrical Requirements

Electrical and Environmental Parameters

Bench top

Module

Control Mode

Button

RS232 serial   communication

Communication   Interface

Optional

DB9 Female

Power Supply

100~240V AC,<30W

5V DC,<15W

Dimension

260(W) X 280(D)X120(H)mm

125(W)X150(D)X20(H)mm

Operation Temp Range

-5~+35℃

Operation   Humidity Range

0~70%